Middleby Cooking Systems Group PS520E User Manual download pdf (Page 24)

SECTION 4

MAINTENANCE

B. Air Fingers Disassembly For cleaning

1. As the air fingers are removed use a felt pen to mark

all parts of the fingers. This includes the finger manifold,

inner plate and the outer plate (see Figure 1-9). If a blank

or choke plate is used, mark that plate also, Fingers are

marked in the order shown; as viewed from the front of

the oven. (The marks for an upper oven should be

preceded with a “U”, example UB1, UT2, etc.)

Standard Fingers

2. Slide blank plates straight out.

3. Remove air fingers.

NOTE: Some oven users require a custom finger

arrangement where the quantity of air fingers may vary.

You can remove the top and bottom fingers and blank

plates from each or either end. It is highly recommended

that each finger be marked before removing so it is placed

in exactly the same position when reassembled (refer to

step 1).

Remove the air fingers, pull the finger at the back side-

pull straight out.

Figure 4-8

Figure 4-9

4. With air fingers out, place them in an upright position

to remove the outer plate.

5. Gently step on the lip of the finger and pull the outer

plate off.

Figure 4-10

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

No comments

Middleby Cooking Systems Group PS520E User Manual Page 24